zigfred plus
Colors
Basisprodukt in Weiss erhältlich
Bedieneinheit in Schwarz zusätzlich im Shop erhältlich
Dimensions and weight
Installation depth: 32mm
Weight: 150 g
Fits all conventional Swiss & EU standardized sockets
Wireless technology
Zigbee PRO 3.0
Bluetooth Low Energy 5.0
Thread (hardware-ready)
NFC ready
Compatible products & systems
Integrated with the customary Swiss switch series Feller EDIZIOdue
Configurable with the zigfred app
zigfred works fundamentally with every Zigbee certified light source, remote control, sensor, and gateway. Unfortunately, there are some isolated gateways in the market that block third-party products.
zigfred is bidirectionally linked with the Zigbee network. This means that zigfred can control lights in the Zigbee network as necessary, as well as that zigfred’s switch channels can be controlled through the gateway and its accessories.
We officially support:
Philips Hue: App*, remote control*, light sources, sensors*, gateway
IKEA TRÅDFRI: Light sources
Google Home: voice command*, app*
Amazon Echo: voice command*
Outputs
zigfred plus
4x dimmer outputs bis max. 150W pro Kanal und max. 450W insgesamt (RC, Phasenabschnitt).
Suitable for most conventional lamps, LED lamps and halogen systems with electronic transformer. Operation of conventional halogen transformers is not recommended.
For devices with high inrush current, the maximum connected load may be reduced.
Non-dimmable lamps can be operated in on/off mode at the dimmer output.
or
Up to 2x motor outputs for blind and shutter motors up to 300W (two dimmer outputs in combination up/down)
Power supply
230 V~ 50Hz Netzspannung
Requires less than 140 mW for standard operation
Three-wire control for maximum compatibility, supply from pole and neutral conductors
Two-wire control for retrofitting in installations without neutral conductor**
** Operation with neutral conductor recommended. Two-wire control is highly dependent on the light sources used and can unfortunately not be guaranteed. A small percentage of LED light sources do not support two-wire control. It could be the case that the light source flickers or glimmers when turned off. We recommend dimmable light sources from 8W for two-wire control.
Installation requirements
Empty socket at installation site (Ø 68 mm)
Smartphone with BLE for configuration
Dry, heated interior
Environmental conditions
Operating temperature: +5 °C to +35 °C
Storage temperature: +5 °C to 50 °C
Relative humidity: 10 % to 85 %, non-condensing (not suitable for bathrooms and unheated rooms, such as basements and garages)
Maximum operating height: 2000 m above sea level, without pressure equalization
