zigfred uno

zigfred plus

Colors

Available in white and black
Control unit in black available additionally in the shop

Dimensions and weight

Installation depth: 32 mm
Weight: 150 g
Fits all standard CH & EU boxes

Wireless technology

Zigbee PRO 3.0

Bluetooth Low Energy 5.0

Thread (hardware-ready)

NFC ready

Compatible products & systems

Integrated with the customary Swiss switch series Feller EDIZIOdue

Configurable with the zigfred app

zigfred funktioniert grundsätzlich mit jedem/r Zigbee-zertifizierten Leuchtmittel, Fernbedienung, Sensor oder Gateway. Leider sind vereinzelt Gateways auf dem Markt, die Drittprodukte blockieren.

zigfred ist bidirektional mit dem Zigbee-Netz verbunden. Das bedeutet, dass zigfred beliebige Leuchten im Zigbee-Netz steuern kann, als auch dass die Schaltkanäle des zigfred durch das Gateway und dessen Zubehör gesteuert werden können.

We officially support:

Philips Hue: App, remote*, bulbs, sensors*, gateway*

IKEA TRÅDFRI: Bulbs

Home Assistant: Full support*

Google Home: Voice control, App*

Amazon Echo: Voice control

Apple HomeKit: Voice control, App*

* * Requires a compatible gateway, e.g. Philips Hue Bridge, Home Assistant. The Philips Hue Bridge supports bulbs only, not blinds.*

** Requires a compatible Zigbee adapter**

Outputs

zigfred uno

1x switch output up to 10 A / 2300W load capacity

Configurable as individual or toggle switch (schema 3 & 6). Switchable socket connection possible.

1x dimmer output for lamps up to max. 150W (RC, phase section).

Suitable for most conventional lamps, LED lamps and halogen systems with electronic transformer. Operation of conventional halogen transformers is not recommended.

For devices with high inrush current, the maximum connected load may be reduced.

Non-dimmable lamps can be operated in on/off mode at the dimmer output.

Power supply

230 V~ 50 Hz mains voltage

Requires less than 140 mW for standard operation

Three-wire operation for maximum compatibility, powered from live and neutral

Two-wire operation for retrofitting in installations without neutral*

** Operation with neutral conductor recommended. Two-wire control is highly dependent on the light sources used and can unfortunately not be guaranteed. A small percentage of LED light sources do not support two-wire control. It could be the case that the light source flickers or glimmers when turned off. We recommend dimmable light sources from 8W for two-wire control.

Installation requirements

Empty socket at installation site (Ø 68 mm)

Smartphone with BLE for configuration

Dry, heated interior

Environmental conditions

Operating temperature: +5 °C to +35 °C

Storage temperature: +5 °C to 50 °C

Relative humidity: 10 % to 85 %, non-condensing (not suitable for bathrooms and unheated rooms like basements and garages)

Maximum operating altitude: 2000 m above sea level, without pressure equalization